Pipe Fittings Manufacturers & Suppliers - Seamless/Welded Steel Pipe Manufacturers in India! Email Us on sales@metline.in | Call Us on +919833604219 | +919967731666

Incoloy 800H/HT Studbolts. Incoloy Studbolts DIN 975 / 976, BS 4882, ANSI B16.5

///Incoloy 800HT Studbolts & “Studs”

Incoloy 800HT Studbolts & “Studs”

3,500.00

Incoloy 800H/HT Studbolts / Studs Manufacturers and Suppliers – DIN975, DIN976

Manufacturing Range  M6 to M100, 1/4″ to 4″ with Varied Lengths
Standards DIN 975, DIN 976, BS 4882, ANSI B16.5
Grades Incoloy 800, Incoloy 800H, Incoloy 800 HT
Equipment Thread Rolling Machines, CNC Machines
Types of Incoloy Studbolts or Studs Full Threaded Incoloy Studs, Double End Incoloy Studs, Tap End Incoloy Studs, Incoloy Studbolts

Studbolts are also, generally referred to as threaded rods or connectors. Upon your request we can manufacture Incoloy 800H/HT studbolts of the dimensions exactly according to your requirements. These may for example include studbolts according to DIN 976 and other dimensions or tolerances of the thread in various sizes, lengths and from various materials. We are producing the Incoloy studbolts by thread rolling. Rolled threads has main benefits such as the increase of strength by means of cold forming, very good surface roughness values, high dimensional accuracy and many others.

Metline is a full line manufacturer of Incoloy 800H/HT studbolts in accordance with DIN, ASME, ASTM and ISO standards. The most commonly used Incoloy Alloys for manufacturing studbolts or studs are Incoloy 800, Incoloy 800H and Incoloy Alloy 800HT.

Description

Manufacturers & Suppliers of Incoloy Studbolts & Studs – Buy DIN975 DIN976 Incoloy Studbolts or Studs at Best Prices

**Incoloy® is a registered trademark of the Special Metals Corporation group of companies

Metline is a professional manufacturer and supplier of Incoloy 800HT studbolts with nuts and washers. We offer hot forged Incoloy studbolts/studs and nuts up to 2″ Dia, and custom length. Our CNC machined Incoloy studbolts can be offered in sizes upto M100 / 4” Dia in custom lengths.

Incoloy 800,Incoloy 800H , and Incoloy 800HT are nickel-iron-chromium super alloys. When exposed to high-temperature these alloys not only provide excellent resistance to oxidation and carburization but also good strength too. These nickel steel alloys are similar except for the higher level of carbon in Incoloy 800H, and the addition of up to 1.20 percent titanium and aluminum in Incoloy 800HT.

Equivalents & Grades of Incoloy Studbolts, Studs

STANDARD INCOLOY 800 INCOLOY 800H INCOLOY 800HT
UNS N08800 N08810 N08811
WERKSTOFF NR. 1.4876 1.4958 / 1.4876 1.4959 / 1.4876
EN X10NiCrAlTi32-20 X5NiCrAlTi31-20 X8NiCrAlTi32-21
BS NA 15 NA 15(H) NA 15(HT)
OR XH32T XH32T XH32T
GOST ЭИ670 ЭИ670 ЭИ670
JIS NCF 800 NCF 800H NCF 800Ht
AFNOR Z8NC32-21 Z8NC33-21

Incoloy Alloys Chemical Composition %

ELEMENT INCOLOY 800 INCOLOY 800H INCOLOY 800HT
NI 30.0 – 35.0 30.0 – 35.0 30.0 – 35.0
CR 19.0 – 23.0 19.0 – 23.0 19.0 – 23.0
FE 39.5 min 39.5 min 39.5 min
MN 1.5 max 1.5 max 1.5 max
C 0.10 max 0.05 – 0.10 0.06 – 0.10
CU 0.75 max 0.75 max 0.75 max
SI 1.0 max 1.0 max 1.0 max
S 0.015 max 0.015 max 0.015 max
AL 0.15 – 0.60 0.15 – 0.60 0.15 – 0.60
TI 0.15 – 0.60 0.15 – 0.60 0.15 – 0.60
* UNS N08811 : Al + Ti = 0.85 – 1.20

Incoloy Alloys Mechanical & Physical Properties

MELTING POINT 2475 – 2525 °F/ 1357 – 1385 °C
SPECIFIC HEAT @ 70°F 0.11 Btu/lb•°F
PERMEABILITY @ 70°F ANNEALED 1.014 (200 Oersted)
CURIE TEMPERATURE -115 °C/ -175 °F
ELASTIC MODULUS 28.50 X 106 psi
ELECTRICAL RESISTIVITY @ 70°F 595 ohm•circ mil/ft
ANNEALLING INCOLOY 800 983 – 1038 °C / 1800 – 1900 °F
ANNEALLING INCOLOY 800H / HT 1147 – 1177°C / 2100 – 2150 °F
QUENCH Rapid Air / Water

 

Density 7.94 g/cm3
Melting Point 1385 °C (2525 °F)
Tensile Strength Psi – 75,000 , MPa – 520
Yield Strength (0.2%Offset) Psi – 30,000 , MPa – 205
Elongation 30%

 

error: Content is protected !!