Pipe Fittings Manufacturers & Suppliers - Seamless/Welded Steel Pipe Manufacturers in India! Email Us on sales@metline.in | Call Us on +919833604219 | +919967731666

Monel K500 Bolts & Nuts Suppliers. Monel K500 Studs Bolts, Monel Hex Nuts & Bolts

///Monel K-500 Nuts & Bolts, Threaded Rods & Fasteners

Monel K-500 Nuts & Bolts, Threaded Rods & Fasteners

3,850.00

Monel K500 Nuts & Bolts Manufacturers & Suppliers, Monel K500 Stud Bolts, Monel K500 Hex Bolts & Nuts, Monel K500 Threaded Bars with Washers

  • Monel K500 Fastener Products: Monel K500 Hex Head Bolts, Monel K500 U Bolts, Monel K500 Eyelet Bolts, Monel K500 Hex Nuts, Monel K500 Washers, Monel K500 Stud Bolts, Monel K500 Threaded Rods, Monel K500 Screws
  • Our Manufacturing Size for Monel K500 Nuts & Bolts Ranges from M6 to M100 with Varied Lengths
  • Monel Grades: Monel 400, Monel K500

Metline is a full line manufacturer of Monel K500 nuts and Monel K500 bolts in accordance with DIN, ASME, ASTM and ISO standards. Monel K500 nuts and bolts exhibit good mechanical properties from sub-zero temperatures up to about 550 °C (1020 °F). They are approved for use in pressure vessels with wall temperatures from -10 to 425 °C (14 to 800 °F). The most commonly used Monel Alloys for manufacturing nuts and bolts are Monel 400 and Monel K500.

Description

Manufacturers & Suppliers of Monel K500 Bolts, Monel K500 Hex Nuts, Monel K500 Threaded Rods & Monel K500 Fasteners

Metline offers a complete range of Monel K500 nuts and bolts such as screws, hex bolt, hex nut, flat plain washer, anchor bolts and U bolts. Metline is a specialist manufacturer of Monel K500 nuts and Monel K500 bolts in size range of M6 to M100, 1/4″ to 4″ in standard and custom lengths.

UNS N04400 or DIN W.Nr. 2.4360 / 2.4361, Monel 400 (also known as “Alloy 400”) is a solid-solution nickel-copper alloy with high strength and excellent resistance in a range of media, including seawater, hydrofluoric acid, sulfuric acid and alkalies. The Alloy 400 is also very resistant to stress-corrosion cracking and pitting corrosion in most fresh and industrial waters. Monel 400 is widely used in many fields such as marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, flanges, fittings, fasteners, and heat exchangers.

UNS N05500 or DIN W.Nr. 2.4375, Monel K-500 (also known as “Alloy K-500”) is a precipitation-hardenable nickel-copper alloy that combines the corrosion resistance of Monel 400 (Alloy 400) with greater strength and hardness. It also has low permeability and is nonmagnetic to under -100°C[-150°F]. The increased properties are obtained by adding aluminum and titanium to the nickel-copper base, and by heating under controlled conditions so that submicroscopic particles of Ni3 (Ti, Al) are precipitated throughout the matrix. Monel K-500 is used primarily for pump shafts, oil well tools and instruments, doctor blades and scrapers, springs, valve trims, fasteners, and marine propeller shafts.

Equivalents of Monel Alloys

NICKEL ALLOYS TRADENAME UNS NO. WERKSTOFF NO DENSITY (8.8 G/CM3)
Alloy 400 Monel 400 N04400 2.4360 8.83
Alloy K-500 Monel K-500 N05500 2.4375 8.44

Chemical Composition of Monel Alloys

Monel K500, % Nickel Copper Aluminum Titanium Carbon Manganese Iron Sulfur Silicon
≥63.0 27.0-33.0 2.30-3.15 0.35-0.85 ≤0.25 ≤1.50 ≤2.0 ≤0.01 ≤0.50
Monel 400, % Nickel Carbon Manganese Iron Sulfur Silicon Copper
≥63.0 ≤0.30 ≤2.0 ≤2.50 ≤0.024 ≤0.50 28.0-34.0

 

Additional information

Size

Normal Dia : ¼" to 4" 6-100 mm
Length : As Specified by user or Upto any Length

Surface Finish

Blackening, Cadmium Zinc plated, Galvanized, Hot Dip Galvanized, Nickel Plated, Buffing, P.T.F.E. Coated

Threads

Metric, BSW, BSF, UNC, UNF, and as per costumers requirement

Meaning

A nut is a type of fastener with a threaded hole. Nuts are almost always used opposite a mating bolt to fasten a stack of parts together. The two partners are kept together by a combination of their threads' friction, a slight stretch of the bolt, and compression of the parts.

Grades

DIN 6915 CI. 10, Stainless Steel AISI 304 / 316. Heavy hex nuts ASTM A194 Gr.8, 8M
ASTM A 194 Gr. 2H, 2HM, G4, G7, G7M, A563/A563M Gr. A, B, DH / 8S/ 10S.
DIN934 / BS3692 CI.6, 8, 10, 12. BS4395 Part 1 & 2

error: Content is protected !!